Rod Specs
- Film thickness: 4 to 400 microns
- Core Diameter: 0.187 inches to 1.500+ inches (4.8mm to 38.1mm)
- Tolerance: +/- 0.0005" (.013mm)
- Length: 3 inches to 30 feet (10 cm to 10 meters)
- Tolerance: +/- 0.125" (3.2mm)
- Straightness Tolerance: .005" per foot TIR (0.13mm per 305mm)
- Wire Material: Type 302 & 304 Stainless Steel
- Core Material
- Type 303 Stainless Steel: Most common (non-magnetic) moderate cost & corrosion resistance
- Type 416 Stainless Steel: Least expensive, low cost & corrosion resistance, magnetic
- Type 316 Stainless Steel: High cost & corrosion resistance
